Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-LayerFormEdit Layer_AD
Created: 七月 28, 2015 | Updated: 十月 11, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1 and 18.0
您正在阅读的是 16.1. 版本。关于最新版本，请前往 PCB_Dlg-LayerForm((Edit Layer))_AD 阅读 22 版本
The Edit Layer dialog
Summary
This dialog allows you to edit the layer name and copper thickness.
Access
In the PCB editor, double-click on a Layer tab at the bottom of the workspace.
Options/Controls
- Name - Create or edit the layer's name in this field.
- Copper thickness - Enter copper thickness for the layer in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mmormil).
When an internal plane is selected, the dialog will appear as below:
- Name - Create or edit the internal plane's name in this field.
- Copper thickness - Enter copper thickness for the internal plane in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mmormil). - Net name - Choose a net from drop-down list to assign to the internal plane.
- Pullback - Enter the pullback value for the internal plane.