Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerCompany Dashboard
Ver: Version: 22
222120.220.120.019.119.018.118.017.117.016.116.015.1
Close
搜索 Search on Documentation
Documentation Altium Designer 文档 ... 对话框参考 Dialogs((S to Z))_AD

PCB_Dlg-InputCoordDialog_CoordEditSnap Grid(1..1000) _AD

Created: 七月 07, 2022 | Updated: 七月 07, 2022 | Applies to version: 22

This document is no longer available beyond version 22. Information can now be found here: Changing Snap Grid Sizing for version 25

注

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能，以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能，请联系Altium销售团队以获取更多信息。

The Snap Grid (1..1000) dialog
The Snap Grid (1..1000) dialog

Summary Copy Link Copied

The Snap Grid dialog allows you to quickly set a different interval size for the Snap Grid. The Snap Grid pulls the cursor to the nearest point on its defined grid. Depending on how the dialog is accessed, the required value can be applied to both Step X and Step Y, or only Step X, or only Step Y.

For more information about the PCB Grids System, click here.

Access Copy Link Copied

The dialog can be accessed from both the PCB Editor and PCB Library Editor in the following ways:

  • Click View » Grids » Set Global Snap Grid from the main menus.
  • Use the Shift+Ctrl+G keyboard shortcut.

Options/Controls Copy Link Copied

Enter the grid interval as required.

The entered grid size is reflected at the left-hand side of the status bar. If the grid was set globally (for both Step X and Step Y), then a single entry for the grid value will be displayed. If the grid was set for Step X or Step Y individually, the individual grid steps will be displayed. The current step sizes for the Snap Grid can also be verified in the Cartesian Grid Editor dialog.
If entering a snap grid setting without specifying units, the entry will be in the default measurement units selected for the design as determined by the Units setting in the Other region in the Board mode of the Properties panel. Specifying units when entering the value (mm or mil) in this dialog will change the default measurement units for the document if not currently the default.
中文(简体)
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
适合打印版本
注

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能，以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能，请联系Altium销售团队以获取更多信息。