Altium Designer 文档
...
对话框参考
Dialogs((G to L))_AD
PCB_Dlg-EditLineConstraintsLine Constraints_AD
Created: 五月 16, 2019 | Updated: 一月 08, 2020
| Applies to versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21
您正在阅读的是 20. 版本。关于最新版本，请前往 PCB_Dlg-EditLineConstraints((Line Constraints))_AD 阅读 22 版本
The Line Constraints dialog.
Summary
This dialog allows the designer to change the width of the line currently being placed, and/or the current layer for placement.
Access
From the PCB Editor and PCB Library Editor, the dialog can be accessed by pressing the Tab key while placing a Slice Polygon Pour.
Options/Controls
- Line Width - use this field to enter a new width for the line. This new width will be applied to the segment currently being placed.
- Current Layer - use this field to switch the layer on which the line is placed. The drop-down menu lists all currently defined (and enabled) layers for the board. The chosen layer will apply to the look-ahead segment of line, that is, the segment after the one currently being placed.