Configuring PCB Arc Keepout Object Properties in Altium Designer

您正在阅读的是 19. 版本。关于最新版本,请前往 Configuring PCB Arc Keepout Object Properties in Altium Designer 阅读 21 版本
 

Parent page: Arc Keepout

PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Arc Keepout object properties, or those that can logically be pre-defined, are available as editable default settings on the PCB Editor - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Arc Keepout object properties are available for editing in the Properties panel when a placed Arc Keepout is selected in the workspace.
For more information about Keepouts, click here.

The Arc Keepout default settings in the Preferences dialog and the Keepout - Arc mode of the Properties panel.         The Arc Keepout default settings in the Preferences dialog and the Keepout - Arc mode of the Properties panel.

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Location (Properties panel only) 

The   icon to the right of this region must be displayed as  (unlocked) in order to access the below fields. Toggle the lock/unlock icon to change its lock status.
  • (X/Y)
    • X (first field) - the current X (horizontal) coordinate of the reference point of the arc keepout, relative to the current workspace origin. Edit to change the X position of the arc keepout. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the arc keepout, relative to the current origin. Edit to change the Y position of the arc keepout. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 

Properties

  • Restricted for ​​Layer - use the drop-down to select the restricted layer.​​
  • Width - displays the current width of the arc keepout. Click to edit.
  • Radius - displays the radius of the arc keepout.
  • Start Angle - displays the start angle. Click to edit.
  • End Angle - displays the end angle. Click to edit.
Values can be defined in either mm or mil units. When entering a value in units other than the current units, add the mm or mil suffix to the value.

Keepout Restrictions

Use this region to select which object types will be restricted by the Keepout. Deselecting an object type will cause the Keepout to allow transgressions by that type of object (not kept out) by not imposing the applicable Clearance Rule. Choices include:

  • Via
  • Track
  • Copper - any object placed on a signal layer, or the multi-layer
  • SMD Pad - single-layer pad
  • TH Pad - thru-hole pad
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能,以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能,请联系Altium销售团队以获取更多信息。

Content