线路

Parent page: Multi-board Schematic Objects

A placed Line

Summary

A Line is a graphic object that can be placed on a multi-board Design schematic document.

Availability

Lines are available for placement in the multi-board schematic editor as follows:

• Choose the Place » Line command from the main menu.
• Click the  button in the graphic objects drop-down on the Active Bar located at the top of the design space. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
• Right-click in the drawing design space then select Place » Line from the context menu.

Placement

After launching the command, the cursor will change to a cross-hair and the editor will enter Line placement mode. Placement is made by performing the following actions:

1. Click to define the starting position of the Line.
2. Move the cursor to set the length and angle the Line then click again to complete placement.
3. Continue placing further Lines or right-click or press Esc to exit the placement mode.

Graphical Editing

The graphical method of editing allows a placed Line object to be selected in the design space and moved or its start/end point locations changed.

When a Line object is selected, editing handles/nodes become available at its start and end points.

A selected Line.Click and drag the Line graphic to reposition it on the drawing document.

• Click and drag a start or finish point node to alter the Line's position, angle or length.

Non-Graphical Editing

Properties page: Line Properties

The non-graphical method of editing a Line is available in the Multi-board Properties panel, which provides editable property fields for the item that is currently selected in the design space.

The Properties panel when a Line object is selected.

To open the Properties panel and access the properties of a placed Line:

• Double-click on the Line graphic.
• Right-click on the Line then select Item Properties from the context menu.

If the Properties panel is already active:

• Click on the Line graphic to access its properties in the panel.

To manually open the Properties panel, select View » Panels » Properties from the main menu or click the button at the bottom right of the design space then select Properties from the pop-up menu.