Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
EDesignData_Dlg-ContentTypesFormContent Types_AD
Created: 十一月 16, 2018 | Updated: 十二月 17, 2018
| Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2
您正在阅读的是 20.1. 版本。关于最新版本，请前往 EDesignData_Dlg-ContentTypesForm((Content Types))_AD 阅读 21 版本
The two variations of the Content Types dialog
Summary
The Content Types dialog allows you to select and enable the desired content type(s) for use in the Edit Lifecycle Definitions and Edit Revision Naming Schemes dialogs.
Access
From the Edit Lifecycle Definitions dialog, Edit Revision Naming Schemes dialog, or Revision Naming Scheme dialog, click the Content Types link on the upper-right.
Options/Controls
The controls are dependent upon how the dialog was accessed as outlined below.
When accessed from the Edit Lifecycle Definitions dialog:
- Control Lifecycle Definition per Content Type - allows you to determine which content types are selected in the table below. To select items for use in a lifecycle definition, enable the checkbox to the right of the desired option under the Use column. Disable the option for items that are not desired. The Use column can be edited only if the Control Lifecycle Definition per Content Type option is enabled.
When accessed from the Edit Revision Naming Schemes dialog:
- Control Revision Naming Scheme per Content Type - allows you to determine which content types are selected in the table below. To select items for use in a revision naming scheme, enable the checkbox to the right of the desired option under the Use column. Disable the option for items that are not desired. The Use column can be edited only if the Control Revision Naming Scheme per Content Type option is enabled.