Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 4
3.23.13.02.12.01.11.0
Close
Поиск Search on Documentation
Документация Документация Altium NEXUS ... ((Dialog Reference))_AD Dialogs((M to R))_AD

WorkspaceManager_Dlg-ConfirmManualMatchFormMatch Manually_AD

Created: мая 10, 2019 | Updated: апреля 15, 2020 | Applies to versions: 1.1, 2.0, 2.1, 3.0 and 3.1
Вы просматриваете версию 4. Для самой новой информации, перейдите на страницу WorkspaceManager_Dlg-ConfirmManualMatchForm((Match Manually))_AD для версии 3.2

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Match Manually dialog
The Match Manually dialog

Summary

The Match Manually dialog is used to choose whether to manually match nets if there are nets that do not match on both sides (between the PCB and schematic). 

Access

The dialog is accessed after updating a document when one or more nets are not able to be matched between the PCB and schematic. For example, it appears after a net name has been changed on the PCB or schematic, but the net name has not been changed on the corresponding design document. 

Options/Controls

  • Don't Show This Again - click to not show this dialog the next time nets cannot be matched.
The state of this option is retained in the [Comparison Options] section of the project file. When Confirm=-1 the Match Manually dialog will display, when Confirm=0 the dialog does not display. Always create a copy of the file before attempting to edit it in a text editor.
  • Yes - click to open the Match dialog in which you can manually match any unmatched schematic nets to unmatched PCB nets.
  • No - click to remove the existing unmatched nets from the PCB and add the new nets that do not currently exist on the PCB. The Engineering Change Order dialog will open.
 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.