WorkspaceManager_Cmd-ResolveProjectCloneConflictResolveProjectCloneConflict_AD

Created: декабря 01, 2020 | Updated: марта 06, 2024 | Applies to versions: 2.1, 3.0, 3.1 and 3.2

Вы просматриваете версию 2.1. Для самой новой информации, перейдите на страницу WorkspaceManager_Cmd-ResolveProjectCloneConflict((ResolveProjectCloneConflict))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Resolve Project Clone Conflict

Summary

This command is used to remedy the conflict between the data for the local project and the data for the mirrored project in the Workspace.

A conflict usually exists because there are changes locally on PC1, but the Workspace contains the updated data from changes made and synced on PC2. For more information on this subject, visit the Management of Projects from within Altium NEXUS page.

Access

This command is accessed from the Projects panel by right-clicking on the project that shows an existing conflict, denoted by the Conflict icon (), then choosing Resolve Project Clone Conflict from the menu.

Use

After launching the command, the Link local project copy to server dialog will open. You will have the option to Keep the Link, Unlink, or Make Available Online, which creates a new server project.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

WorkspaceManager_Cmd-ResolveProjectCloneConflictResolveProjectCloneConflict_AD

Summary

Access

Use

Was this page helpful?