SystemDesigner_Cmd-ExportToPdfExportToPdf_AD

Created: июля 07, 2017 | Updated: марта 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Вы просматриваете версию 2.1. Для самой новой информации, перейдите на страницу SystemDesigner_Cmd-ExportToPdf((ExportToPdf))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Export to PDF

Applied Parameters: None

Summary

This command is used to export the active Multi-board Schematic document (*.MbsDoc), in PDF format.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

This command is accessed from the Multi-board Schematic Editor by choosing the File » Export to PDF command from the main menus.

Use

First, ensure that the Multi-board Schematic document that you wish to export, is open as the active document in the main design window.

After launching the command, the standard Save As dialog will appear. Use this dialog to determine where, and under what name, the exported PDF file is saved. By default, the PDF will be saved in the same location as the Multi-board Schematic document.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

SystemDesigner_Cmd-ExportToPdfExportToPdf_AD

Summary

Access

Use

Was this page helpful?