Sch_Dlg-SchComponentPinsPropertiesFormComponent Pin Editor_AD
Created: июля 10, 2017 | Updated: июля 01, 2024
| Applies to version: 1.0
Вы просматриваете версию 1.0. Для самой новой информации, перейдите на страницу Sch_Dlg-SchComponentPinsPropertiesForm((Component Pin Editor))_AD для версии 5
The Component Pin Editor dialog
Summary
The Component Pin Editor dialog displays all pins for either the component in the active schematic library document or a placed component (or part thereof) in the schematic editor. It provides a single, convenient location for you to modify certain properties of any pin associated to that component. In addition to providing a means of editing pin properties, the dialog also allows you to add new pins or delete existing ones.
Access
The Component Pin Editor dialog can be accessed from either the schematic editor or the schematic library editor by performing the following steps:
- Double-click on the desired placed component (or right-click then choose Properties from the context menu) to open the Properties panel in Component mode.
- On the Pins tab of the panel, click
.
Options/Controls
- Pin Grid - this area presents all pins for the component. For each pin, the following information is displayed:
- Designator - the numerical identifier of the pin. Each pin in a part must have a unique designator.
- Name - the display name for the pin. Note that the pin name is optional, this field can be left blank if required. Alternatively, enter a string into the Name text field, then use the Name checkbox to display or hide the name.
- Desc - the description for the pin.
- Footprint Model Mapping - the title of this is the pad of the indicated linked footprint model to which this pin of the schematic component is mapped. A separate field is presented for each linked footprint model.
- Type - the electrical type of the pin. This type is used when compiling a project or analyzing a schematic document to detect electrical connection errors (using the Electrical Rules Check feature). Available types are: Input, I/O, Output, Open Collector, Passive, HiZ, Open Emitter, and Power.
- Owner - the parent part to which the pin is associated. For a single-part component, this entry will always be 1; it is only meaningful for a multi-part component. A multi-part component also includes a non-graphical part, Part Zero. Part Zero is used for pins that are to be included in all parts of the multi-part component, for example, power pins.
- Show - reflects whether the pin is visible on the sheet (enabled) or hidden (disabled). The power pins of multi-part components are typically hidden when their display would otherwise cause unnecessary clutter on the schematic sheet.
- Number - this is used to determine whether the designator for the pin is displayed (enabled) or hidden (disabled) when the parent part is placed on a schematic sheet.
- Name - this is used to determine whether the display name for the pin is displayed (enabled) or hidden (disabled) when the parent part is placed on a schematic sheet.
- Add - click this button to add a new pin to the component. The new pin will be assigned the next available designator (which can be pin 0), and will have the following default properties:
- Name - 0
- Desc - blank
- Mapping - all 0
- Type - Passive
- Owner - the number of the active/selected part.
- Show/Number/Name - all enabled.
- Remove - click this button to remove the currently selected pin from the component. A confirmation dialog will appear - click Yes to proceed with the removal. If removing a pin from a placed component instance on a schematic, you may need to rewire any existing wiring that was connected to that pin.
- Edit - click this button to access the Pin Properties dialog for the currently selected pin.
Right-Click Menu
The grid right-click menu offers the following commands:
- Jump - use to jump to the currently selected pin within the workspace (zoomed and centered (where possible)).
- Add - use to add a new pin to the component (or part thereof).
- Remove - use to remove the currently selected pin from the component. A confirmation dialog will appear, click Yes to proceed with the removal.
- Edit - use to open the Pin Properties dialog to edit the currently selected pin.
- Report - click to open the Report Preview dialog to preview the report before printing it.