Sch_Cmd-ToggleSelectedSheetEntryIOToggleSelectedSheetEntryIO_AD

Applied Parameters: ObjectKind=SheetEntry

Summary

This command is used to toggle the I/O Type for all selected sheet entries, on the current schematic sheet, simultaneously and where applicable, and irrespective of sheet symbol to which they are associated.

Access

This command can be accessed in the Schematic Editor, by:

• Choosing the Edit » Move » Toggle Selected Sheet Entries IO Type command from the main menus.
• Locating and using the Toggle Selected Sheet Entries IO Type command on the Active Bar.

Use

After launching the command, the I/O Type defined for each sheet entry will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

• Unspecified remains Unspecified.
• Output changes to Input.
• Input changes to Output.
• Bidirectional remains Bidirectional.

Applied Parameters: ContextSensitive=True|ObjectKind=SheetEntry

Summary

This command is used to toggle the I/O Type for one or more selected sheet entries, on the current schematic sheet, simultaneously and where applicable, and irrespective of sheet symbol to which they are associated.

Access

This command is accessed in the Schematic Editor, by right-clicking over a selected sheet entry (or a sheet entry that is part of a group of selected sheet entries) and choosing the Sheet Entry Actions » Toggle Selected Sheet Entries IO Type command from the context menu.

Use

After launching the command, the I/O Type defined for each sheet entry will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

• Unspecified remains Unspecified.
• Output changes to Input.
• Input changes to Output.
• Bidirectional remains Bidirectional.

Applied Parameters: ContextSensitive=True|ObjectKind=Port

Summary

This command is used to toggle the I/O Type for one or more ports, on the current schematic sheet, simultaneously and where applicable.

Access

This command is accessed in the Schematic Editor, by:

• Right-clicking over a placed port (not selected) and choosing the Port Actions » Toggle Port IO Type command from the context menu.
• Right-clicking over a selected port (or a port that is part of a group of selected ports) and choosing the Port Actions » Toggle Selected Ports IO Type command from the context menu.

Use

After launching the command, the I/O Type defined for each port will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

• Unspecified remains Unspecified.
• Output changes to Input.
• Input changes to Output.
• Bidirectional remains Bidirectional.