Sch_Cmd-MoveCursorMoveCursor_AD

Created: августа 03, 2017 | Updated: марта 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

Вы просматриваете версию 3.0. Для самой новой информации, перейдите на страницу Sch_Cmd-MoveCursor((MoveCursor))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:

Move Cursor Up

Applied Parameters: Direction=Up|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor upwards in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Up Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved upward in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further upward.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Move Cursor Down

Applied Parameters: Direction=Down|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor downwards in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Down Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved downward in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further downward.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Move Cursor Left

Applied Parameters: Direction=Left|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor to the left in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Left Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the left in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further to the left.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Move Cursor Right

Applied Parameters: Direction=Right|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor to the right in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Right Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the right in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further to the right.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Move Cursor Up 10

Applied Parameters: Direction=Up|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor upwards in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Up Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved upward in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further upward.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Move Cursor Down 10

Applied Parameters: Direction=Down|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor downwards in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Down Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved downward in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further downward.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Move Cursor Left 10

Applied Parameters: Direction=Left|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor to the left in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Left Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the left in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further to the left.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Move Cursor Right 10

Applied Parameters: Direction=Right|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor to the right in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Right Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the right in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further to the right.

Tips

One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Sch_Cmd-MoveCursorMoveCursor_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?