SystemDesigner_Cmd-RotateSelectionClockwiseRotateSelectionClockwise_AD

Created: февраля 06, 2023 | Updated: февраля 06, 2023 | Applies to version: 21

This document is no longer available beyond version 21.0. Information can now be found here: Multi-board Schematic Editor Moving Shortcuts for version 25

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Rotate Selected Modules Clockwise

Applied Parameters: None

Summary

This command is used to rotate one or more selected module objects in a clockwise direction.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

With at least one module object selected, this command can be accessed from the Multi-board Schematic Editor by:

Choosing the Edit » Move » Rotate Selection Clockwise command from the main menus.
Using the Shift+Spacebar keyboard shortcut.

Use

First, ensure that all modules that you wish to include in the rotation are selected in the main workspace.

After launching the command, the selected modules will be rotated clockwise by 90°.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

SystemDesigner_Cmd-RotateSelectionClockwiseRotateSelectionClockwise_AD

Summary

Access

Use

Was this page helpful?