Документация Altium Designer
...
Объекты редактора схем
Working with a Rectangle Object on a Schematic Sheet in Altium Designer
Configuring Schematic Rectangle Object Properties in Altium Designer
Created: сентября 26, 2019 | Updated: октября 16, 2019
| Applies to versions: 20.0, 20.1 and 20.2
Вы просматриваете версию 20.1. Для самой новой информации, перейдите на страницу Configuring Schematic Rectangle Object Properties in Altium Designer для версии 21
Parent page: Rectangle
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Rectangle object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the
button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Rectangle object properties are available for editing in the Rectangle dialog and the Properties panel when a placed Rectangle is selected in the workspace.
Location (Properties panel only)
- (X/Y)
- X (first field) - the current X (horizontal) coordinate of the reference point of the object, relative to the current workspace origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) - The current Y (vertical) coordinate of the reference point of the object, relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
Properties
- Width - enter the width of the object, which may be edited.
- Height - enter the height of the object, which may be edited.
- Border - use the drop-down to select the default from the available choices: Smallest, Small, Medium, and Large. Click on the color box to access a drop-down from which you can select the default border color.
- Fill Color - check to enable fills. Click on the color box to access a drop-down from which you can select the default fill color.
- Transparent - check to make the primitive transparent.