Configuring Schematic Line Object Properties in Altium Designer

Вы просматриваете версию 20. Для самой новой информации, перейдите на страницу Configuring Schematic Line Object Properties in Altium Designer для версии 21
 

Parent page: Polyline

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Polyline object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.

  • Post-placement settings – all Polyline object properties are available for editing in the Polyline dialog and the Properties panel when a placed Polyline is selected in the workspace.

If the Double Click Runs Interactive Properties option is disabled (default) on the Schematic - Graphical Editing page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Properties

  • Line - use the drop-down to select the desired line. Choices are: SmallestSmallMedium, and Large. Click the color box to select the desired color for the object.
  • Line Style - use the drop-down to select the line style. Choices are: SolidDashedDotted, and Dash dotted.
  • Start Line Shape - use the drop-down to select the shape of the beginning of the line. Choices are: NoneArrowSolid Arrow, TailSolid TailCircle, and Square.
  • End Line Shape - use the drop-down to select the the shape of the ending of the line. Choices are: NoneArrowSolid Arrow, TailSolid TailCircle, and Square.
  • Line Size Shape - use the drop-down to select the the shape of the line size. Choices are: SmallestSmallMedium, and Large.

Vertices (Properties panel only)

  • Vertices Grid - lists all of the vertex points currently defined for the object in terms of:
    • Index - the assigned index of the vertex (non-editable).
    • X - the X (horizontal) coordinate for the vertex. Click to edit.
    • Y - the Y (vertical) coordinate for the vertex. Click to edit.
  • Add - click to add a new vertex point. The new vertex will be added below the currently focused vertex entry and will initially have the same X,Y coordinates as the focused entry. Click to remove the currently selected vertex.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Content