Configuring Schematic Library IEEE Symbol Object Properties in Altium Designer
Created: июня 14, 2017 | Updated: февраля 26, 2019
| Applies to versions: 18.0, 18.1, 19.0 and 19.1
Вы просматриваете версию 19.0. Для самой новой информации, перейдите на страницу Configuring Schematic Library IEEE Symbol Object Properties in Altium Designer для версии 21
Parent page: IEEE Symbol
Schematic Library Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in the following way:
- Post-placement settings – all IEEE Symbol object properties are available for editing in the Properties panel when a placed IEEE Symbol is selected in the Schematic Library workspace.
The IEEE Symbol mode of the Properties panel
Location
- (X/Y) - the current X (horizontal) and Y (vertical) coordinate of the reference point of the object, relative to the current workspace origin. Edit to change the X and Y position of the object. The values can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Rotation - use the drop-down to select the rotation. Choices are: 0°, 90°, 180°, and 270°.
Properties
- Symbol - defines the graphical IEEE symbol. Select a symbol from the drop-down list.
- Size - the current size of the IEEE symbol. The default size is 10 DXP Default Units (100mil). Increase or decrease this value to make the symbol bigger or smaller. Entering a negative value results in the symbol appearing as if rotated by 180 degrees.
- Line - the width of the line used to draw the outline of the symbol. Available widths are:
Smallest
,Small
,Medium
, andLarge
. Click the color box to access controls to change the color.