Configuring Schematic Ellipse Object Properties in Altium Designer
Created: апреля 08, 2021 | Updated: апреля 08, 2021
| Applies to version: 21
This document is no longer available beyond version 21.0. Information can now be found here: Ellipse Properties for version 24
Parent page: Ellipse
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Ellipse object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the
button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Ellipse object properties are available for editing in Ellipse dialog and the Properties panel when a placed Ellipse is selected in the design space.
Location (Properties panel only)
- (X/Y)
- X (first field) - the current X (horizontal) coordinate of the reference point of the object, relative to the current design space origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) - The current Y (vertical) coordinate of the reference point of the object, relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
Properties
- Border - use the drop-down to select the desired border.
- X Radius - the x-radius of the ellipse, which may be edited.
- Y Radius - the x-radius of the ellipse, which may be edited.
- Fill Color - enable to use a fill color. Click on the colored box to access a drop-down from which you can select the color.
- Transparent - enable to make the object transparent.