Configuring Schematic Blanket Object Properties in Altium Designer
Created: сентября 24, 2019 | Updated: октября 01, 2019
| Applies to versions: 20.0, 20.1 and 20.2
Вы просматриваете версию 20.2. Для самой новой информации, перейдите на страницу Configuring Schematic Blanket Object Properties in Altium Designer для версии 21
Parent page: Blanket
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Blanket object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the
button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Blanket object properties are available for editing in the Blanket dialog and the Properties panel when a placed Blanket is selected in the workspace.
Properties
- Border Width - use the drop-down to select the desired border width. Choices are: Smallest, Small, Medium, and Large.
- Line Style - use the drop-down to select the desired line style. Choices are: Solid, Dashed, Dotted, and Dash Dotted.
- Border Color - click the color box to select the desired color for the border.
- Fill Color - click the color box to select the desired color for the fill.
- Collapsed and Disabled - check to collapse and disable blankets.