Документация Altium Designer
...
PCB Query((Fields))_AD
PCB Query Fields((M to R))_AD
Query_Lang-PCBFunctions_Fields_Pad_CornerRadius_MidLayer23Pad_CornerRadius_MidLayer23_AD
Created: августа 02, 2022 | Updated: августа 02, 2022
| Applies to version: 21
This document is no longer available beyond version 21.0. Information can now be found here: Pad_CornerRadius_MidLayerN for version 25
Parent page: PCB Query Functions - Fields
Summary
Returns pad objects whose Pad Corner Radius (%) (Mid Layer 23) property complies with the Query.
Syntax
Pad_CornerRadius_MidLayer23 = CornerRadius_String
Pad_CornerRadius_MidLayer23 <> CornerRadius_String
CornerRadius_String specifies the corner radius, expressed as a percentage.
Example Usage
Pad_CornerRadius_MidLayer23 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 23) property equals 50%.
Pad_CornerRadius_MidLayer23 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 23) property equals 30%.
Tips
- The single quote characters (') at the start and end of
CornerRadius_Stringare mandatory. - For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 23) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
- For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Pad Corner Radius (%) (Mid Layer 23) property will be the same as the Pad Corner Radius (%) (Mid Layer 1) property, since the Corner Radius specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
- The Pad Corner Radius (%) (Mid Layer 23) property is only defined for pad objects.