Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
Fill Style
Created: мая 17, 2016 | Updated: июня 17, 2017
| Applies to versions: 16.1, 17.0 and 17.1
Вы просматриваете версию 16.0. Для самой новой информации, перейдите на страницу Fill Style для версии 22
The Fill Style dialog.
Summary
The Fill Style dialog allows you to customize the display color and pattern for each layer in a Draftsman document.
Access
The dialog is accessed in the following ways:
- From the Layer Information dialog, click
next to the Fill option. - From the Component Display Properties dialog, click in the Hatching Pattern region.
- From the General tab of the Draftsman Document Options dialog, click in the Hatching Pattern region.
Options/Controls
The preview image on the right-hand side reflects options selected in the dialog.
- Pattern - Select an existing pattern from the drop-down (
ANSI 31orANSI 37) or selectSolidfor no pattern at all. - Color - Select the fill pattern color from the drop-down menu.
- Back Color - Select the fill backround color from the drop-down menu. This is the color used when the
Solidpattern option is selected. - Scale - Enter the scale of the fill pattern.
- Rotation - Enter the rotation of the fill pattern.
- Hatch Thickness - Ener the thickness of the lines in the fill pattern.