Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-EqualizeNetsOptionsFormEqualize Nets_AD
Created: июля 28, 2015 | Updated: июня 17, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Вы просматриваете версию 16.0. Для самой новой информации, перейдите на страницу PCB_Dlg-EqualizeNetsOptionsForm((Equalize Nets))_AD для версии 22
The Equalize Nets Dialog.
Summary
The Equalize Nets dialog is used to match the length of nets identified by the Matched Net Lengths design rule. Before launching the dialog, make sure you have set up a Matched Net Lengths design rule, covering the nets whose length you wish to equalize.
Access
The Equalize Nets dialog can be accessed by clicking Tools » Equalize Net Lengths.
Options/Controls
- Style - Specify the corner style for the tracks. Options include
90 Degrees,45 Degrees, andRounded. - Gap - Specify the gap between two adjacent tracks.
- Amplitude - Specify the tuning amplitude when equalizing nets.