Working with the Acute Angle Design Rule on a PCB in Altium Designer

Вы просматриваете версию 18. Для самой новой информации, перейдите на страницу Working with the Acute Angle Design Rule on a PCB in Altium Designer для версии 21
 

Rule category: Manufacturing

Rule classification: Unary

Summary

This rule specifies the minimum angle permitted between any objects in the same net. The Acute Angle rule works on nets only. It finds all the acute angles created by any objects in one net. The rule essentially creates a contour from all the primitives in a net (on the same layer) and then analyzes this contour for any points that might create an angle smaller then the acute angle limit value.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

Default constraints for the Acute Angle rule.Default constraints for the Acute Angle rule.

  • Minimum Angle - specifies the minimum permissible angle created between objects in the same net.
  • Check Tracks Only - enable this option to force the DRC to check acute angles for track objects only.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Content