PCB_Dlg-SetupAnnotatePositional Re-Annotate_AD

Вы просматриваете версию 21.0. Для самой новой информации, перейдите на страницу PCB_Dlg-SetupAnnotate((Positional Re-Annotate))_AD для версии 22

The Positional Re-Annotate dialog
The Positional Re-Annotate dialog

Summary

The Positional Re-Annotate dialog is used to configure the scope of annotation (components (further targeted by side, or selection) or free pads), the direction of annotation (based on object position), and additional options, such as a starting index, and whether locked designators should be protected. As you select a style of annotation, a graphical depiction is shown within the dialog as a visual indication of how annotation will occur.

Access

The dialog is accessed by clicking Tools » Re-Annotate from the main menus.

Options/Controls

  • Annotate Direction - choose the order of re-annotation. The options available are:
    • 1 By Ascending X Then Ascending Y
    • 2 By Ascending X Then Descending Y 
    • 3 By Ascending Y Then Ascending X 
    • 4 By Descending Y Then Ascending X 
    • 5 Name from Position
The Name from Position option uses the X,Y location of the component, in relation to the Absolute Origin (not a set User Origin).
  • Annotate Scope - specify the scope of re-annotation for components or pads. 
    • Components
      • Top Side, Then Bottom Side 
      • Top Side Only
      • Bottom Side Only 
      • Selected Only
    • Pads
      • Free Pads.
  • Protect Locked Designators - enable to ignore components during re-annotation whose designators are locked.
  • Comparison Threshold - the position distance threshold to change re-annotation direction.
  • Start Index - specify the start index for re-annotation. So for example, consider four resistors with current designators R1, R2, R3, R4. Re-annotating with a Start Index of 10 would change the designators to R10, R11, R12, R13 (and in accordance with other options defined). This option applies to the first four annotation direction options only.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.