Cartesian Grid Editor
This document is no longer available beyond version 21.0. Information can now be found here: PCB Grid Types for version 24
The Cartesian Grid Editor dialog when you select a Cartesian Grid from the Grid Manager region of the Properties pane and the version of the dialog when you select
another grid type, such as a Global Board Snap Grid from the Grid Manager region of the Properties panel.
Summary
This dialog allows you to view and modify properties for the selected Cartesian grid. This can be either the default global snap grid or a customized local grid. The latter is used for object placement and movement in a specific area of the board, while the former is used in any area of the board not covered by a dedicated local grid.
Access
The dialog can be accessed from either the PCB editor or PCB library editor in one of the following ways:
- In the Properties panel in Board mode, select the desired grid in the Grid Manager region then click the Properties button.
- In the Properties panel in Board mode, double-click the desired Cartesian Grid within the Grid Manager region.
To add a Cartesian Grid to the Grid Manager region of the Properties panel while in Board mode, use the Add drop-down then select the desired grid to add.
Options/Controls
Settings
- Name – enter a meaningful name. For example, you might name the grid using a format that reflects its purpose (e.g., Grid for Component-Side Memory).
- Unit – specifies the measurement units used for the grid either
Imperial
orMetric
. - Rotation – specifies whether the grid is to be rotated (about the specified origin point) and by how much.
Steps
- Step X – the distance between grid lines in the X plane. Enter the required step size directly or select from a range of common sizes available in the associated drop-down.
- Step Y – the distance between grid lines in the Y plane. Enter the required step size directly or select from a range of common sizes available in the associated drop-down.
The following controls also are available that allow you to define the X and/or Y step sizes directly from within the PCB design space. In each case, you will be taken to the design space to specify two 'calculating' locations and the resulting step size will be calculated accordingly.
- Set Step X in PCB View – the resulting size is taken as the hypotenuse of the triangle formed by the chosen points in the design space.
- Set Step Y in PCB View – the resulting size is taken as the hypotenuse of the triangle formed by the chosen points in the design space.
- Set Step X from Delta X – the resulting size is taken using just the difference in the X coordinate.
- Set Step Y from Delta Y – the resulting size is taken using just the difference in the Y coordinate.
- Set Both Steps from Delta – the resulting sizes are taken using just the differences in the X and Y coordinates.
Origin
- Show Origin – enable to show an origin marker in the design space.
- Origin X – specifies the X coordinate for the center point of the grid in the design space.
- Origin Y – specifies the Y coordinate for the center point of the grid in the design space.
- Set Origin in PCB View – click to be taken to the PCB design space, in which you can click to define the centerpoint for the grid's origin. The resulting coordinate values will be loaded into the Origin X and Origin Y fields.
Display
- Fine – use the associated drop-down to define the markers used for the fine-level display of the grid in the design space, either
Lines
,Dots
, orDo Not Draw
. ChooseDo Not Draw
if you do not want to use the fine-level display grid. The step size used for the markers is that defined in the Steps region. Click on the associated color swatch to access the standard Choose Color dialog from where you can specify the color to be used for the fine-level display grid in the design space. You also can reset the color back to its default using the Reset to Default button. - Coarse – use the associated drop-down to define the markers used for the coarse-level display of the grid in the design space, either
Lines
,Dots
, orDo Not Draw
. ChooseDo Not Draw
if you do not want to use the coarse-level display grid. The coarse-level display grid is the fine-level display grid with an increased step size, in accordance with the entry selected in the Multiplier field. Click on the associated color swatch to access the standard Choose Color dialog from where you can specify the color to be used for the coarse-level display grid in the design space. You are free to choose a completely different color to that used for the fine-level display grid. You also can quickly lighten or darken the shade of the color currently used for the fine-level display grid by clicking the Lighter or Darker buttons.
- Multiplier – use this field to specify the required multiple of the grid's step size, either
2x Grid Step
,5x Grid Step
, or10x Grid Step
.
Extents
- Width – use this field to define the width of one quadrant of the grid.
- Height – use this field to define the height of one quadrant of the grid.
Controls are also available that allow you to define the width and/or height directly from within the PCB design space. In each case, you will be taken to the design space to specify two 'calculating' locations, and the resulting width and/or height will be calculated accordingly.
- Set Width in PCB View – the resulting width is taken using just the difference in the X coordinate between the chosen points in the design space.
- Set Height in PCB View – the resulting height is taken using just the difference in the Y coordinate between the chosen points in the design space.
- Set Width and Height in PCB View – the resulting width and height are taken using just the differences in the X and Y coordinates.
Quadrants
Use this region to specify which quadrants the grid is to occupy. The grid area is the same for all enabled quadrants as defined by the setting for Width and Height in the Extents region of the dialog.
Example of using the Quadrants region options. Note that only 1
, 2
, and 4
quadrants are enabled for use, and the resulted grid occupies only these quadrants relative to the grid origin.