PCB_Cmd-MoveBoardMoveBoard_AD

Created: января 18, 2023 | Updated: января 18, 2023 | Applies to version: 22

This document is no longer available beyond version 22.. Information can now be found here: Move Board for version 25

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Move Board

Copy Link Copied

Applied Parameters: Object=Board

Summary

This command is used to move the entire board - the board shape, plus all design objects within that shape - to another position in the current document.

Access

This command can be accessed from the PCB Editor when configured in Board Planning Mode by choosing the Design » Move Board command from the main menus.

The current viewing mode for the PCB document can be changed using the corresponding commands from the main View menu. To switch to Board Planning Mode, use the command of the same name or use the 1 keyboard shortcut.

Use

After launching the command, an outline copy of the board shape will be attached to the cursor, held by its bottom-left corner. Move the shape to the desired new location within the workspace then click or press Enter to effect placement. All constituent design objects will be moved also to maintain position within the board shape.

To cancel without moving, right-click or press Esc.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Версия для печати

Примечание

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

PCB_Cmd-MoveBoardMoveBoard_AD

Summary

Access

Use

Was this page helpful?