PCB_Cmd-FlipSelectedObjectsFlipSelectedObjects_AD

Created: января 18, 2023 | Updated: января 18, 2023 | Applies to version: 22

This document is no longer available beyond version 22. Information can now be found here: Flip Selection for version 25

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Flip Selection

Copy Link Copied

Applied Parameters: Axis=Horizontal

Summary

This command is used to flip the selected object(s) to the corresponding layer on the opposite side of the board.

Access

This command can be accessed from the PCB Editor and PCB Library Editor by:

Choosing the Edit » Move » Flip Selection command from the main menus.

Use

Ensure that only the objects that you want to flip are selected.

After launching the command, the selected objects will be flipped. For example, objects on the Top Layer will be flipped to the Bottom Layer; objects on the Top Overlay will be flipped to the Bottom Overlay, etc.

Tips

Use the Undo command to restore the flipped selection.
Designator and Comment text becomes mirrored after a flip action.
For a pad that exists on the Multi-Layer, flipping will essentially reverse the order of its XY size pairings and shapes. Therefore, if a style of Top-Middle-Bottom has been used and the shapes are initially Round-Rectangle-Octagonal, flipping will reverse the stack and thus the shapes from the top will become Octagonal-Rectangle-Round.

Flip Selection (from Active Bar)

Copy Link Copied

Applied Parameters: Axis=Horizontal

Summary

This command is used to flip the selected object(s) to the corresponding layer on the opposite side of the board.

Access

This command can be accessed from the PCB Editor and PCB Library Editor by:

Locating and using the Flip Selection command on the Active Bar.

Click and hold on the active button to access a menu of all associated commands for that grouping. If the command has been recently used from the Active Bar, it will become the active/visible button. When other commands are available, it is indicated by a triangle at the bottom-right corner of the button.

Use

Ensure that only the objects that you want to flip are selected.

Tips

Use the Undo command to restore the flipped selection.
Designator and Comment text becomes mirrored after a flip action.
For a pad that exists on the Multi-Layer, flipping will essentially reverse the order of its XY size pairings and shapes. Therefore, if a style of Top-Middle-Bottom has been used and the shapes are initially Round-Rectangle-Octagonal, flipping will reverse the stack and thus the shapes from the top will become Octagonal-Rectangle-Round.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Версия для печати

Примечание

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

PCB_Cmd-FlipSelectedObjectsFlipSelectedObjects_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?