PCB_Cmd-EditFilterTextEditFilterText_AD

Created: июля 28, 2017 | Updated: июля 10, 2018 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Вы просматриваете версию 19.0. Для самой новой информации, перейдите на страницу PCB_Cmd-EditFilterText((EditFilterText))_AD для версии 22

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Copy Filter Text

Copy Link Copied

Applied Parameters: Action=Copy

Summary

This command is used to copy the selected query expression text from the Filter region of the Filter panel - either the PCB Filter panel (PCB Editor) or the PCBLIB Filter panel (PCB Library Editor) - to the clipboard.

Access

With the required text selected in the Filter region of the panel, this command is accessed from the PCB Editor and the PCB Library Editor by using the Ctrl+C keyboard shortcut.

Use

First, select the text that you want to copy - all or part of the current query expression presented in the Filter region of the Filter panel.

After launching the command, the text will be copied to the clipboard and can be used elsewhere within or outside of Altium Designer.

Cut Filter Text

Copy Link Copied

Applied Parameters: Action=Cut

Summary

This command is used to clear the selected query expression text from the Filter region of the Filter panel - either the PCB Filter panel (PCB Editor) or the PCBLIB Filter panel (PCB Library Editor) - and copy it to the clipboard.

Access

With the required text selected in the Filter region of the panel, this command is accessed from the PCB Editor and the PCB Library Editor by using the Ctrl+X keyboard shortcut.

Use

First, select the text that you want to cut - all or part of the current query expression presented in the Filter region of the Filter panel.

After launching the command, the text will be removed from the panel and copied to the clipboard. It can then be used elsewhere within or outside of Altium Designer.

Paste Filter Text

Copy Link Copied

Applied Parameters: Action=Paste

Summary

This command is used to paste text from the clipboard into the Filter region of the Filter panel - either the PCB Filter panel (PCB Editor) or the PCBLIB Filter panel (PCB Library Editor).

Access

With the required text available on the clipboard, this command is accessed from the PCB Editor and the PCB Library Editor by using the Ctrl+V keyboard shortcut.

Use

First, ensure the text that you want to paste is available on the Windows clipboard. Also, ensure the text cursor is located at the desired paste location within the Filter region of the Filter panel.

After launching the command, the text will be pasted into the region at the current text cursor location.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Версия для печати

Примечание

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

PCB_Cmd-EditFilterTextEditFilterText_AD

Summary

Access

Use

Summary

Access

Use

Summary

Access

Use

Was this page helpful?