EDesignData_Dlg-itemRevisionBaseFormCreate or Edit Revision_AD

Created: октября 08, 2019 | Updated: октября 10, 2019 | Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Вы просматриваете версию 20.2. Для самой новой информации, перейдите на страницу EDesignData_Dlg-itemRevisionBaseForm((Create or Edit Revision))_AD для версии 21

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Edit Revision

Copy Link Copied

The Edit Revision dialog

Summary

The Edit Revision dialog is used to modify properties for a planned item revision (i.e. initial revision of an item).

Access

After creating the next planned revision of an item, the dialog is accessed from the Lifecycle tab of the Explorer panel by right-clicking on the revision and selecting the Edit Revision command from the menu.

The Edit Revision dialog is only available if data has not yet been released into a revision of an item (in a managed content server) that is currently in the 'planned' state.

Options/Controls

Name - the name of the item to be released.
Description - displays any description associated with the item. Click in the text field to edit the description.
Revision State - this is a non-editable field which displays the lifecycle state of this revision. Note that because data has not yet been released into this revision, the lifecycle state will be Planned.
Ancestor Revision – the preceding revision from which this revision of the item has been created/branched. Click to open a dialog to navigate to and select an existing revision. Click Clear to remove the current Ancestor Revision.

Create Revision

Copy Link Copied

The Create Revision dialog

Summary

The Create Revision dialog is used to modify properties for the next planned revision of the item being created.

Access

The dialog is accessed from the Lifecycle tab of the Explorer panel by right-clicking on the current revision and selecting the Establish Planned Revision <level for Item ID> command from the menu.

The Create Revision dialog is only available when creating the next planned revision of the item.

Options/Controls

Name - the name of the item to be released.
Description - displays any description associated with the item. Click in the text field to edit the description.
Revision State - this is a non-editable field which displays the lifecycle state of this revision. Note that because the revision is being newly created, the lifecycle state will be Planned.
Ancestor Revision – the preceding revision from which this item is created/branched. Click to open a dialog to navigate to and select an existing revision. Click Clear to remove the current Ancestor Revision.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Версия для печати

Примечание

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

EDesignData_Dlg-itemRevisionBaseFormCreate or Edit Revision_AD

The Edit Revision dialog

Summary

Access

Options/Controls

The Create Revision dialog

Summary

Access

Options/Controls

Was this page helpful?