EDAImporter_Dlg-ImporterSettingsImporter Settings_AD

Вы просматриваете версию 18. Для самой новой информации, перейдите на страницу EDAImporter_Dlg-ImporterSettings((Importer Settings))_AD для версии 18.1

The Importer settings dialogThe Importer settings dialog

Summary

The Importer settings dialog provides controls to control design rules, missing vias, keep-out conversions, and other various options during the import process.

Access

The dialog is accessed by clicking Importer Options on the PADS PCB Library ASCII File Import Options dialog.

Options/Controls

Design Rules - use the following options to control which design rules are imported during the import process.

  • Import Clearance Rules - enable to import all clearance design rules.
  • Import Routing Rules - enable to import all routing rules.
  • Import High Speed Rules - enable to import all high speed rules.

Internal Plane Options - use the following options to control internal planes during the import process.

  • Plane Pullback Distance - enter the required distance in the textbox.
  • Rebuild All Internal Planes - enable to rebuild all internal planes.

Options - use the following to enable/disable additional options, e.g., missing vias.

  • Add Missing Via On Route Layer Change - enable to add missing vias when the route layer is changed.
  • Generate Teardrops - enable to generate teardrops.
  • Generate Rules For Thermals In Pad Stacks - enable to generate rules for thermals in pad stacks.
  • Change Attributes For Used Layers - enable to change attributes for used layers.
  • Override Pad Inner Value With Largest Found - enable to override inner value of the pad with the largest value found.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.