EDAExporter_Dlg-PCBExportSetupExport to AutoCAD (PCB) _AD

Вы просматриваете версию 18. Для самой новой информации, перейдите на страницу EDAExporter_Dlg-PCBExportSetup((Export to AutoCAD (PCB) ))_AD для версии 21

The Export to AutoCAD dialogThe Export to AutoCAD dialog

Summary

The Export to AutoCAD dialog allows you to export the current PCB document to an AutoCAD *.DXF or *.DWG file as layered graphic data.

Access

The Export to AutoCAD dialog is accessed by clicking Save in the Export File browser dialog after clicking File » Export » DXF/DWG

Options/Controls

Setup

  • Options
    • AutoCAD Version – use the drop down to select the version of AutoCAD that applies to the exported file.
    • Format – use to select the format (DWG or DXF) of the exported AutoCAD file.
    • Units – select either Imperial or Metric units for the export conversion's dimensional data.
  • Holes
    • Export pads and via holes – check this option to enable the export of Pad and Via hole data.
      • On dedicated hole layers – select to cause Pad/Via hole data to be exported as arc circles on dedicated layers. The added layers will be named PadHoleLayer and ViaHoleLayer in the exported file.
      • On the pad or via layer – select to cause Pads  and Vias to be exported as donuts (arc circles) on layers that each Pad or Via occupies (say for a simple Via, the Top and Bottom layers). Each of the circular, arc-based donut objects are generated with a radius and line width to create a shape that graphically matches the size and hole size of the source Pad or Via.
  • Components
    • Export as blocks – components will be exported as single AutoCAD-compliant Blocks (grouped collections of primitive objects).
    • Export as primitives – components will be exported as the primitive objects that form the component.
  • Tracks and Arcs
    • Export with rounded ends – check this option to create AutoCAD line/arc objects with round ends.
    • Export with square ends – check this option to create AutoCAD line/arc objects with square ends.
  • Primitives To Export With Zero Line Widths
    • None – no primitives will be exported with zero line widths. The line/arc width data in the DXF/DWG file will match the corresponding line/arc width data in the source PCB layout.
    • All – all primitives in the PCB layout will be exported with a zero line width.
    • Selected – only the selected primitives in the PCB workspace will be exported with a zero line width.
  • Layers
    • All – all PCB layers will be exported.
    • Currently Visible Layers – only layers that are currently visible in the PCB workspace will be exported. Hidden layers are ignored.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.