Altium Designer Documentation
...
((Dialog Reference))_AD
Dialogs((S to Z))_AD
PCB_Dlg-SplitPlaneSplit Plane_AD
Created: Lipiec 28, 2015 | Updated: Czerwiec 19, 2017
| Applies to versions: 15.1, 16.0, 16.1 and 17.0
Now reading version 15.1. For the latest, read: PCB_Dlg-SplitPlane((Split Plane))_AD for version 22
The Split Plane dialog.
Summary
This dialog allows you to specify the required net to which to connect the currently selected Split Plane region. A split plane is an enclosed region on an internal plane that divides the plane into separate electrically isolated areas. Each region is defined by placing boundary lines to encompass all the pins on that net. Each area is then assigned to a different net which creates two or more split planes on the one internal power plane layer.
Access
The dialog is accessed from the PCB Editor in the following ways:
- Double-clicking on a split plane region directly in the workspace.
- Double-clicking on the entry for the split plane, in the Split Planes region of the PCB panel (when configured in Split Plane Editor mode).
- Right-clicking on the entry for the split plane, in the Split Planes region of the PCB panel (when configured in Split Plane Editor mode), and choosing Properties from the context menu.
Options/Controls
- Connect to Net - use this field to specify the net that the split plane region is to connect to. The associated drop-down lists all currently loaded nets for the design.