Search In: Doc:Documentation: Altium CircuitMaker
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Close
Szukaj Search on Documentation

Saving and Loading Stackups, Using Presets and Setting Units for Your Board in CircuitMaker

Created: Lipiec 30, 2020 | Updated: luty 11, 2022
 

The Home | Settings region accessed from the Layer Stack Manager editor includes commands for using pre-defined layer stacks, saving to and loading the stackup from a file, and selecting the measurement units used in the editor. 

The Layer Stack Manager editor can be accessed by choosing Home | Board | Layer Stack Manager from the PCB editor.
For information about the Layer Stack Manager editor, refer to the Layer Stack Manager page.

Presets

Use the drop-down to select from a list of pre-defined layer stacks.  These are the layers that will be fabricated during the manufacturing process.

Load

Click to load stackup documents from the desired location. The Open Stackup Document dialog opens in which you can select the desired document.

Save

Click to save stackup documents to the desired location. The Save Stackup Document dialog opens in which you can select the desired document.

Units

Click the desired measurement units in the layer stack.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content