Pie Chart

Parent page: Sch Dialogs

The Pie Chart dialog

Summary

This dialog provides controls to specify the properties of a Pie Chart object. A pie chart is a non-electrical drawing primitive. It is a circular sector graphic element that can be placed on a schematic sheet and can be filled or unfilled.

Access

The Pie Chart dialog can be accessed during placement by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

• Double-click on the placed pie chart object.
• Place the cursor over the pie chart object, right-click then choose Properties from the context menu.

Options/Controls

• Radius - the radius of the pie chart measured from its center point to the center of the arc line.
• Border Width - the width of the border used to draw the outline of the pie piece. Available widths are: Smallest, Small, Medium, and Large.
• Start Angle - the start angle of the pie piece in degrees from the horizontal.
• End Angle - the end angle of the pie piece in degrees from the horizontal.

• Location X/Y - the current X (horizontal) and Y (vertical) coordinates for the center point of the pie chart. Edit these values to change the position of the pie chart in the horizontal and/or vertical planes respectively.
• Color - click the color sample to change the fill color for the pie chart using the standard Choose Color dialog. The Draw Solid option must be enabled for the pie chart to be filled.
• Draw Solid - if this option is enabled, the pie chart is filled with the color set in the Color field. If this option is disabled, the pie chart is drawn in outline only.
• Border Color - click the color sample to change the color used for the pie chart's outline using the standard Choose Color dialog.
• Locked - enable this option to protect the pie chart from being edited graphically.