WorkspaceManager_Dlg-LineNumberingLine Numbering_AD

Now reading version 3.0. For the latest, read: WorkspaceManager_Dlg-LineNumbering((Line Numbering))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

LineNumberingdlg_SetLineNumbers_AD19    LineNumberingdlg_ContinueNumbering

                                                                     LineNumbering dlg_RenumberAll

Three variations of the Line numbering dialog

Summary

The Line numbering dialog is used to select the action required when numbering the Line# column in an ActiveBOM document (*BomDoc).

Refer to the Line # Options dialog is used to configure the numbering start value and increment.

Access

The dialog is accessed from an ActiveBOM document (*BomDoc) by clicking the ActiveBON Line numbering button button. 

Options/Controls

Set Line Numbers Variation

LineNumbering dlg_Set Line Numbers

This variation of the dialog opens when ALL Line# cells in an ActiveBOM document (*BomDoc) are empty.
  • Set Line numbers for selected rows - click to use the existing numbers as references and continuously number the SELECTED empty cells, starting with the nearest non-empty cells above.
  • Set Line numbers for all rows - click to use the existing numbers as references and continuously number ALL empty cells, starting with the nearest non-empty cells above.

Continue Numbering Variation

LineNumbering Dlg_ ContinueNumbering

This variation of the dialog opens when SOME of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.
  • Continue numbering - click to use the existing numbers as references and continuously number empty cells starting from the nearest non-empty cells above.

  • Renumber all - click to delete all existing numbers and renumber all rows.

Renumber All Variation

LineNumbering dialog_ Renumber All

This variation of the dialog opens when ALL of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.
  • Renumber all - click to delete all existing numbers and renumber all rows.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
콘텐츠