Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

WorkspaceManager_Dlg-EditProjectVariantFormEdit Project Variant_AD

Created: September 27, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Edit Project Variant dialog
The Edit Project Variant dialog

Summary

The Edit Project Variant dialog allows you to edit the properties of a variant.

Access

The dialog is accessed by clicking Edit Variant button in the Variant Management dialog after selecting an available variant.

Options/Controls

  • Description – enter an appropriate description of the Variant, which will be used as an identifying label.
  • Allow variation of fabrication outputs – check this box to allow variations of fabrication outputs (as well as assembly variation outputs).
In terms of PCB Configurations, if the option to allow fabrication outputs is enabled for a variant, that variant can be used to drive the outputs for configurations targeting both Blank Board and Assembled Board Items.
This is an enhancement to the way in which variants can be used in that it allows you to vary a fabrication output. Although it is the fabrication output that is being changed, it is only changing the silkscreen output based on a variation in the component's Comment parameter. You cannot change any other aspect of the fabricated board, such as the routing, the layout of the components, or the layer stack. 
  • Parameters – this region is a list of variant parameters (name and value). Parameters are added and edited via the Parameter Properties dialog.
  • Add – click to open the Parameter Properties dialog to add a parameter for the variant.
  • Remove – click to delete the selected parameter(s).
  • Edit – click to open the Parameter Properties dialog to edit a selected parameter.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.