WorkspaceManager_Cmd-VaultCategory_OpenProjectVaultCategory_OpenProject_AD

Created: June 29, 2021 | Updated: March 06, 2024 | Applies to versions: 4 and 5

Now reading version 4. For the latest, read: WorkspaceManager_Cmd-VaultCategory_OpenProject((VaultCategory_OpenProject))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Open Project

Applied Parameters: None

Summary

This command is used to open a project in an Altium NEXUS Workspace.

For more information about on-site servers and Workspaces, see Altium Concord Pro.

This command is only available if you are connected to an Altium NEXUS Workspace.

Access

This command can be accessed when signed into an Altium NEXUS Workspace in the following ways:

Right-click on the Workspace entry within the Projects panel then choose Open Project from the menu.
Click the ellipsis () adjacent to the Workspace entry within the Projects panel then choose Open Project from the menu.

Use

Once the command is selected, the Open Project dialog opens, which provides a single location to open, search for and browse projects.

프린터 출력용 버전

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

WorkspaceManager_Cmd-VaultCategory_OpenProjectVaultCategory_OpenProject_AD

Summary

Access

Use

Was this page helpful?