VersionControl_Cmd-PastePaste_AD

Created: July 27, 2015 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Now reading version 3.0. For the latest, read: VersionControl_Cmd-Paste((Paste))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: VersionControl Commands

The following pre-packaged resources, derived from this base command, are available:

Paste

Applied Parameters: None

Summary

This command is used to paste previously copied document(s) into the currently selected folder for the active project.

Access

This command can be accessed from the Project Files region of the Storage Manager panel with the required target folder selected by:

Right-clicking and choosing the Paste command from the context menu.
Using the Ctrl+V keyboard shortcut.

The command will only be available provided one or more documents have been previously copied.

Use

Ensure the folder into which you want to paste the copied document(s) is selected in the Folders region of the Storage Manager panel.

After launching the command, the previously copied document(s) will be pasted into the currently selected folder.

Tips

You may need to use the Refresh command (on the same right-click context menu for the region or F5) to refresh the content of the folder and see the newly pasted content.
The content on the clipboard can only be pasted once.

Paste Folder

Applied Parameters: ObjectKind=Folder

Summary

This command is used to paste a previously copied folder or project directory into the folder structure for the active project.

Access

This command can be accessed from the Folders region of the Storage Manager panel with the required target folder selected by:

Right-clicking and choosing the Paste command from the context menu.
Using the Ctrl+V keyboard shortcut.

The command will only be available provided a folder (or folder structure) has been previously copied.

Use

Ensure the folder into which you want to paste the copied content is selected in the Folders region of the Storage Manager panel.

After launching the command, the previously copied folder content will be pasted into the currently selected folder.

Tips

The content on the clipboard can only be pasted once.

프린터 출력용 버전

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

VersionControl_Cmd-PastePaste_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?