SchLibGenerationTool_Dlg-PinDataSmartPastePin Data Smart Paste_AD

Created: July 18, 2017 | Updated: April 07, 2018 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Pin Data Smart Paste dialog

Summary

The Pin Data Smart Paste dialog is used to populate multiple columns of data from an external source while using the Symbol Wizard. The dialog opens already populated with the source data.

Access

The dialog is accessed by right-clicking in the grid region of the Symbol Wizard dialog then selecting Smart Paste.

Options/Controls

Delimiter - check the boxes of the delimiters that match those used in the source data. Choices include:
- Tab
- Semicolon
- Comma
- Space
- Other

Data Preview - use the drop-down to select a heading for that column. The available selections are derived from the column headings in the grid region of the Symbol Wizard dialog.

The preview area dynamically updates and shows how your changes affect the text in each column.

Additional Controls

Paste - click to complete the smart paste process. The source data will be copied into the matching columns you specified in the grid region.

Right-Click Menu

Remove Line - click over a line then select this command to remove that line. If the command is performed over empty space in the dialog, the bottom line is removed.
Remove Column - click over a column then select this command to remove that column.

프린터 출력용 버전

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.