Configuring Schematic Text String Object Properties in Altium NEXUS

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Text String

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Text String object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Text String object properties are available for editing in the Properties panel when a placed Text String is selected in the workspace.

The Text String default settings in the Preferences dialog and the Text mode of the Properties panel               The Text String default settings in the Preferences dialog and the Text mode of the Properties panel

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Location (Properties panel only)

  • Rotation - use the drop-down to select the rotation. Choices are: 0 Degrees90 Degrees180 Degrees, and 270 Degrees.

Properties 

  • Text - use the drop-down to select or enter the desired text.
  • URL - the URL for the text string.
  • Font - use the controls to select the desired font, font size, color, and attributes to bold, italicize, etc., if desired.
  • Justification - select the justification by clicking on an arrow that corresponds with the desired justification or the circle (to center).
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
콘텐츠