Altium NEXUS Documentation
...
Schematic Design Objects in Altium NEXUS
Working with a Compile Mask Object on a Schematic Sheet in Altium NEXUS
Configuring Schematic Compile Mask Object Properties in Altium NEXUS
Created: April 08, 2021 | Updated: April 08, 2021
| Applies to version: 4
This document is no longer available beyond version 4. Information can now be found here: Compile Mask Properties for version 5
Parent page: Compile Mask
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in the following way:
- Post-placement settings – all Compile Mask object properties are available for editing in the Compile Mask dialog and the Properties panel when a placed Compile Mask is selected in the design space.
Location
- (X/Y)
- X (first field) - the current X (horizontal) coordinate of the reference point of the object, relative to the current design space origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) - the current Y (vertical) coordinate of the reference point of the object, relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
Properties
- Width - enter the width of the object.
- Height - enter the height of the object.
- Border - use the drop-down to select the desired border.
- Fill Color - click the color box to select the desired color for the object.
- Collapsed and Disabled - check the box to collapse and disable the object.