Sch_Cmd-LineStyleSelectLineStyleSelect_AD

Created: August 03, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Now reading version 3.2. For the latest, read: Sch_Cmd-LineStyleSelect((LineStyleSelect))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:

Select Solid Line Style

Applied Parameters: _Value_=Solid

Summary

This command is used to change the line style for the selected design object to Solid, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line Style drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line style you wish to change is selected in the main design workspace.

After launching the command, the object's line style will be set to Solid and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Line Style property. Only Blanket and Polyline objects have this property.
You can select multiple objects to have their Line Style changed using this feature.

Select Dashed Line Style

Applied Parameters: _Value_=Dashed

Summary

This command is used to change the line style for the selected design object to Dashed, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line Style drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line style you wish to change is selected in the main design workspace.

After launching the command, the object's line style will be set to Dashed and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Line Style property. Only Blanket and Polyline objects have this property.
You can select multiple objects to have their Line Style changed using this feature.

Select Dotted Line Style

Applied Parameters: _Value_=Dotted

Summary

This command is used to change the line style for the selected design object to Dotted, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line Style drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line style you wish to change is selected in the main design workspace.

After launching the command, the object's line style will be set to Dotted and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Line Style property. Only Blanket and Polyline objects have this property.
You can select multiple objects to have their Line Style changed using this feature.

Select Dash-Dotted Line Style

Applied Parameters: _Value_=Dash dotted

Summary

This command is used to change the line style for the selected design object to Dash-Dotted, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line Style drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line style you wish to change is selected in the main design workspace.

After launching the command, the object's line style will be set to Dash-Dotted and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Line Style property. Only Blanket and Polyline objects have this property.
You can select multiple objects to have their Line Style changed using this feature.
The Dash-Dotted line style enables designs to meet GOST requirements. GOST stipulates the use of the dash-dotted line style when drawing a device on a schematic sheet (on the board it is used to show a hole's center line).

프린터 출력용 버전

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Sch_Cmd-LineStyleSelectLineStyleSelect_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?