Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.0
43.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... PCB Query((Fields))_AD PCB Query Fields((M to R))_AD

Query_Lang-PCBFunctions_Fields_PadShape_MidLayer1PadShape_MidLayer1_AD

Created: September 03, 2015 | Updated: August 17, 2021 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Shape (Mid Layer 1) property complies with the Query.

Syntax

PadShape_MidLayer1 = PadShape_String
PadShape_MidLayer1 <> PadShape_String

PadShape_String must be one of the following strings:

  • 'Round'
  • 'Rectangular'
  • 'Octagonal'
  • 'Rounded Rectangle'

Example Usage

PadShape_MidLayer1 = 'Rectangular'
Returns all pad objects whose Shape (Mid Layer 1) property is set to Rectangular.

PadShape_MidLayer1 <> 'Octagonal'
Returns all objects except for pad objects whose Shape (Mid Layer 1) property is set to Octagonal.

PadShape_MidLayer1 = 'Round' || PadShape_MidLayer1 = 'Rectangular'
Returns all pad objects whose Shape (Mid Layer 1) property is set to either Round or Rectangular.

IsPad && PadShape_MidLayer1 <> 'Octagonal'
Returns all objects except for pad objects whose Shape (Mid Layer 1) property is set to Octagonal.

Tips

  1. The single quote characters (') at the start and end of PadShape_String are mandatory.
  2. For simple pads (with Stack Mode set to Simple) the Shape (Mid Layer 1) property will be the same as the Shape (All Layers) property, since the specified shape is used for all signal layers.
  3. The Shape (Mid Layer 1) property is only defined for pad objects.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.