Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 5
543.23.13.02.12.01.1
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((S to Z))_AD

PcbDrawing_Dlg-SnapGrid (1..1000)Snap Grid (1..1000) (Draftsman) _AD

Created: June 09, 2022 | Updated: June 09, 2022 | Applies to version: 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Snap Grid (1..1000) (Draftsman) dialogThe Snap Grid (1..1000) (Draftsman) dialog

Summary

The Snap Grid (1..1000) dialog allows you to quickly set a different interval size for the Snap Grid for a Draftsman document (*.PCBDwf). The Snap Grid pulls the cursor to the nearest point on its defined grid. 

For a high-level look at how the Altium Draftsman Drawing System provides an interactive approach to the creation of production documentation for your PCBs, see Draftsman.

Access

The dialog can be accessed from the Draftsman editor in the following ways:

  • Click View » Set Grid Size from the main menus.
  • Use the G keyboard shortcut.

Options/Controls

Enter the grid interval as required.

The entered grid size is reflected at the left-hand side of the status bar.
If entering a snap grid setting without specifying units, the entry will be in the default measurement units selected for the design as determined by the Units setting in the Units region in the Document Options mode of the Properties panel. Specifying units when entering the value (mm or mil) in this dialog will change the default measurement units for the document if not currently the default.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.