Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 3.0
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

PCB_Dlg-ChoseModelFormChoose Model_AD

Created: May 06, 2019 | Updated: May 07, 2019 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2 and 4
Now reading version 3.0. For the latest, read: PCB_Dlg-ChoseModelForm((Choose Model))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

The Choose Model dialog
The Choose Model dialog

Summary

The Choose Model dialog allows you to select an existing 3D model to use when placing a 3D Body.

Access

The dialog is accessed by clicking the Choose button under Source in the Properties region of the Properties panel in 3D Body mode. 

The 3D Model Type must be set to Generic and the Source must be set to Link to Model in the Properties region of the Properties panel for the Choose button to be available.

Options/Controls

Directories

  • List of directories - search through the list of directories to find and select the desired 3D model revision.
  • Add Directories - click to open the PCB Editor - Models Preferences page in which you can add model search paths/directories.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
콘텐츠