PCB_Cmd-ToggleComponentDesignatorCommentToggleComponentDesignatorComment_AD

Created: August 03, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

Now reading version 4. For the latest, read: PCB_Cmd-ToggleComponentDesignatorComment((ToggleComponentDesignatorComment))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Toggle Component Designator Display (Context Sensitive)

Applied Parameters: Object=Designator|ContextObject=Component

Summary

This command is used to toggle the display of the designator - between not hidden and hidden - for the component under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a placed component in the workspace then choosing the Component Actions » Hide Designator command (if the designator is currently shown), or the Component Actions » Show Designator command (if the designator is currently hidden) from the context menu.

Use

After launching the command, the component's designator will either be hidden or made visible depending on whether it is currently visible or not.

Tips

This command toggles the component's Show Designator property (when viewed through the PCB List panel). Display of the designator can also be controlled when viewing the properties for the selected component in the Properties panel. Click the control to the right of the Designator field, which will reflect the designator as being displayed () or hidden (), respectively.

Toggle Component Comment Display (Context Sensitive)

Applied Parameters: Object=Comment|ContextObject=Component

Summary

This command is used to toggle the display of the comment - between not hidden and hidden - for the component under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a placed component in the workspace then choosing the Component Actions » Hide Comment command (if the comment is currently shown), or the Component Actions » Show Comment command (if the comment is currently hidden) from the context menu.

Use

After launching the command, the component's comment will either be hidden or made visible depending on whether it is currently visible or not.

Tips

This command toggles the component's Show Comment property (when viewed through the PCB List panel). Display of the comment can also be controlled when viewing the properties for the selected component in the Properties panel. Click the control to the right of the Comment field, which will reflect the comment as being displayed () or hidden (), respectively.

프린터 출력용 버전

만약 문제가 있으시다면, 텍스트/이미지를 선택하신 상태에서 Ctrl + Enter를 누르셔서 저희에게 피드백을 보내주세요.

PCB_Cmd-ToggleComponentDesignatorCommentToggleComponentDesignatorComment_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?