PCB_Cmd-ResetCameraResetCamera_AD

Created: August 02, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

Now reading version 2.1. For the latest, read: PCB_Cmd-ResetCamera((ResetCamera))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

3D View - Zero Rotation

Applied Parameters: None

Summary

This command is used to change the view of the board (or component) in 3D so that you are looking straight down from above (perpendicular), with zero rotation.

Access

This command is accessed from the PCB Editor and the PCB Library Editor in 3D Layout Mode by:

Choosing the View » Zero Rotation command from the main menus.
Using the 0 keyboard shortcut.

The current viewing mode for the PCB document can be changed using the corresponding commands from the main View menu. To switch to 3D Layout Mode, use the command of the same name, or use the 3 keyboard shortcut.

Use

After launching the command, the 3D view will be changed, if necessary, so that you are viewing the board from above and with no rotation.

Tips

In addition, you can use the applicable drop-down field on the PCB Standard toolbar (PCB Editor) or the PCB Lib Standard toolbar (PCB Library Editor) to quickly choose from a set of predefined 3D views when viewing your board (or library components) in 3D.

3D View - 90 Degree Rotation

Applied Parameters: To=Rotate90

Summary

This command is used to change the view of the board (or component) in 3D so that you are looking straight down from above (perpendicular) with 90 degree (clockwise) rotation in the X-plane.

Access

This command is accessed from the PCB Editor and the PCB Library Editor in 3D Layout Mode by:

Choosing the View » 90 Degree Rotation command from the main menus.
Using the 9 keyboard shortcut.

Use

After launching the command, the 3D view will be changed, if necessary, so that you are viewing the board from above and with 90 degree (clockwise) rotation in the X-plane.

Tips

In addition, you can use the applicable drop-down field on the PCB Standard toolbar (PCB Editor) or the PCB Lib Standard toolbar (PCB Library Editor) to quickly choose from a set of predefined 3D views when viewing your board (or library components) in 3D.

3D View - Orthogonal Rotation

Applied Parameters: To=RotateOrtho

Summary

This command is used to change the view of the board (or component) in 3D so that you are looking at the board from an orthogonal perspective.

Access

This command is accessed from the PCB Editor and the PCB Library Editor in 3D Layout Mode by:

Choosing the View » Orthogonal Rotation command from the main menus.
Using the 8 keyboard shortcut.

Use

After launching the command, the 3D view will be changed, if necessary, so that you are viewing the board from an orthogonal perspective (looking from above, and from the left).

Tips

In addition, you can use the applicable drop-down field on the PCB Standard toolbar (PCB Editor) or the PCB Lib Standard toolbar (PCB Library Editor), to quickly choose from a set of predefined 3D views when viewing your board (or library components) in 3D.

프린터 출력용 버전

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-ResetCameraResetCamera_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?