Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.1
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((S to Z))_AD

EDesignData_Dlg-StateTransitionPropertiesFormState Transition Properties_AD

Created: December 17, 2018 | Updated: December 18, 2018 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The State Transition Properties dialog
The State Transition Properties dialog

Summary

The State Transition Properties dialog provides controls to edit the properties for a State Transition.

For more information about lifecycle definitions, click here.

Access

The dialog is accessed in the following ways:

  • Right-click in the State Before and Transitions region of the Edit Lifecycle Definitions dialog then select Add State Transition from the context menu.
  • In the Edit Lifecycle Definitions dialog, click the  associated with a State Transition. 

Options/Controls

Properties

  • State Transition Name - enter the name for the State Transition.
  • State After - use the drop-down to select the state that follows the State Transition that is being added.
  • Menu Entry Text - this is the text that will appear in the right-click menu in the Item view allowing to perform this state transition for a given item revision. The parameter $RevisionId will be substituted with the ID of the revision.

State Transition Permissions

Use the drop-down to select how the permissions for the State Transition are set:

  • Controlled - select this option to limit permissions based on the default Server permissions.
  • Using Approvals - choose this option to allow permissions that are selected for this specific State Transition, which can be added in the table below using the Add button.

Additional Controls

  • Add - use the drop-down to select from the following options:
    • Add Approval Group - select to add an approval group. The new group is named New Approval Group by default. You can edit the name using the Edit Approval Group Name command defined below. 
    • Add Role - select to add a Role using the Search for Role dialog.
    • Add User - select to add a User using the Search for Users dialog.
    • Edit Approval Group Name - select to open a dialog in which you can enter a name for a newly added approval group.
    • Move Up - click to move the currently selected item up one position.
    • Move Down - click to move the currently selected item down one position.
    • Remove - click to remove the currently selected group, role or user.
The Add commands are available only if Using Approvals is selected in State Transitions Permissions. 
  • Remove - click to remove the currently selected group, role or user.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
콘텐츠