Altium Designer 기술문서
...
Retired Documentation - Projects
((Project Compiler Violations Reference))_AD
WorkspaceManager_Err-EntryIsEmptyEntry Is Empty_AD
Created: September 22, 2017 | Updated: August 04, 2021
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Now reading version 20.2. For the latest, read: WorkspaceManager_Err-EntryIsEmpty((Entry Is Empty))_AD for version 21
Parent category: Violations Associated with Mated Parts
Default report mode: 
Summary
This violation occurs when a module entry does not currently reference a connector component in the child design project referenced by its parent module.
Notification
If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog, an offending object will display a colored squiggle beneath it. Hovering over the object will display a pop-up hint that summarizes the violation. A notification is displayed in the Messages panel in the following format:
Entry "<EntryDesignator>" is empty in "Module <ModuleDesignator>(<ChildProjectName>)"
where:
- EntryDesignator - is the designator of the offending module entry.
- ModuleDesignator is the designator of the module on the Multi-board Schematic that is used to reference the child design project.
- ChildProjectName - is the name, including extension, of the child project referenced by the module.
Recommendation for Resolution
This violation can arise when:
- A connector component in the referenced child project and currently associated to an existing module entry has had its special
System:Connectorparameter removed, and that change has been inadvertently imported to the Multi-board Schematic document. In this case, add the parameter back to the component then import the change back to the Multi-board Schematic document. - A new entry has been placed manually within the parent module. In this case, import changes from the child project to synchronize the required entries with their underlying connectors then remove the redundant entry.
Tip
- Object hints will only appear provided the Enable Connectivity Insight option is enabled on the System - Design Insight page of the Preferences dialog. Use the controls associated with the Object Hints entry in the Connectivity Insight Options region of the page to determine the launch style for such hints (Mouse Hover and/or Alt+Double Click).