WorkspaceManager_Err-ComponentImplementationsWithInvalidPinMappingsComponent Implementations with Invalid Pin Mappings_AD

 

Parent category: Violations Associated with Components

Default report mode:

Summary

This violation occurs when compiling an Integrated Library Package (*.LibPkg) and the pin mapping between the schematic component and the linked model is found to be invalid.

Notification

If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog) an offending object will display a colored squiggle beneath it. A notification is also displayed in the Messages panel in the following format:

ComponentName: Could not find port <ModelPinNumber> on model <ModelName> for pin <ComponentPinNumber> - PCB model related

ComponentName: Could not map port <ModelPinNumber> on model <ModelName> to a pin - simulation model related

where:

  • ComponentName is the name of the component in the source schematic library.
  • ModelPinNumber is the expected designator for the pin/pad that could not be found on the linked model.
  • ModelName is the name of the model that is linked to the component.
  • ComponentPinNumber is the designator of the pin on the source schematic component to which the erroneous pin of the model is mapped.

Recommendation for Resolution

If the PCB model related error message is displayed, double-click on the entry for the PCB model link to access the PCB Model dialog. Once there, click on the Pin Map button to access the Model Map dialog. In the Component Pin Designator column, find the pin number flagged by the message (ComponentPinNumber). The violation arises because the corresponding entry in the Model Pin Designator column points to a pad designator that does not exist in the PCB model. Amend the entry as required. Typically there will be one-to-one mapping, with the designators on both sides the same.

If the simulation model related message is displayed, double-click on the entry for the simulation model link to access the Sim Model dialog. Once there, click on the Port Map tab. This violation will arise when the model pin is not correctly mapped to a pin of the schematic component. This can happen when the entry for the model pin has been set to a pin that is already mapped, or to Not Connected. Amend the entry as required.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

콘텐츠