Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
WorkspaceManager_Dlg-ThemedFilterDialogCustom Filter_AD
Created: January 16, 2023 | Updated: January 16, 2023
| Applies to version: 21
This document is no longer available beyond version 21. Information can now be found here: Custom Filter Dialog for version 25
The Custom Filter dialog
Summary
The Custom FIlter dialog is used to specify which rows of data to show based on the filtering criteria defined for that column.
Access
The Custom Filter dialog is accessed from the Pick and Place Setup dialog. The Pick and Place Setup dialog is accessed in one of the following ways:
- Click File » Assembly Outputs » Generates pick and place files from a PCB.
- Double-click Generates pick and place files under Assembly Outputs in the Outputs region of an OutJob (*.OutJob).
From the Pick and Place Setup dialog, click the filter icon ( 
) in a column header then click the (Custom…) entry.
Options/Controls
- First drop-down - use to select the desired filter. Enter a value in the textbox (e.g., to show only 16MHz items, enter 16MHz) or use the drop-down to select the type of filter data.
- AND/OR - select the filtering condition desired.
- Second drop-down - use to select the desired second filter if desired. Enter a value in the textbox (e.g., to show only 16MHz items, enter 16MHz) or use the drop-down to select the type of filter data.
Tip
- Once applied, the filter icon turns blue to indicate custom filtering is in force for that column.